Toilet Tank Repair

There are many different types of Toilet Repair services, including toilet tank repairs. These repairs usually involve replacing the toilet bowl and the flange and can also involve replacing the water supply valve. This is a major repair that should be done by a professional like Plumber. The repair costs usually range from $80 to $1,500, but they are worth it in the long run if you have to replace the toilet more than once.


First, the toilet will hiss. If the water is not draining from the tank, the float ball is out of alignment. If this is the case, it is time to replace it. If the water is not draining, you can try to bend the float arm, so it isn’t rubbing against the side of the toilet tank. If you can’t reach the float ball, you can check the lift wire and guide to see if they’re bent.

A professional toilet repair can cost anywhere from $50 to over $700. A toilet repair technician will evaluate your toilet and perform tests to determine where the problem is located. After the inspection, a repair person can recommend the best course of action for your particular issue. These services typically include replacing the wax seal. If this is the case, you can fix the problem yourself at home or have it replaced. But be prepared to pay a lot of money if you’re not handy.

First, you need to disconnect the water supply. Once you’ve done this, you need to remove the toilet bowl from the toilet wall. Then, unscrew the nuts holding it in place. A crescent wrench or flathead screwdriver can help you loosen stubborn nuts. During the removal process, you can use a sponge to soak up the water. Then, you can place the new bowl on top of the old one and check the drain.

While some repairs can be done at home, others require the expertise of a plumber. If you’re not a plumber, there are many toilet repair tips you can follow to solve the problem. Some simple toilet repairs don’t require specialized tools and don’t take too long to fix. Most of these parts can be purchased at your local home improvement store. Typical tools needed to repair a toilet are a cordless drill, hammer drill, hacksaw, and locking pliers.

A broken flange is another common toilet repair. Broken flanges can cause water to leak and may even cause the toilet to rock. If the flange is not tight, water will leak from the toilet and cause damage to the floor beneath the bathroom. A broken flange may result in a rotten egg-like smell around the toilet. If you can’t figure out which component of a toilet is causing the leak, it’s time to call a professional plumber.

Most common toilet repairs are minor. The most common issue is replacing the flushing part. However, if it doesn’t, you may need to replace the entire fixture. In this case, it costs between $50 and $400. Fortunately, there are plenty of DIY projects that you can complete at home to avoid paying a plumber to repair your toilet. If you’re handy, you can repair the clog by tightening the bolts that hold the handle. However, if the bolts are damaged, you’ll have to replace the entire part.

Replacement of the bowl is another common toilet repair. While the repair may cost up to $200, you can also attempt it yourself for as little as $60. The bowl is made of porcelain, so it is likely to crack if a heavy object is dropped in it. The bowl may also stain over time. Most bowl damage can be repaired, and stains can be removed, but severe damage cannot. A full replacement may be more cost-effective.

Toilet overflows can spill water onto the bathroom floor. In many cases, this can be repaired at home using a toilet plunger. Simply insert a plunger into a full bowl and press the plunger against the bottom of the bowl to create a seal. Then, make a rhythmic pumping motion, and the clog will be lifted. If plunging does not solve the problem, a professional can be hired to fix the issue.

The replacement may be more cost-effective than repair, as toilets last for about fifteen to twenty years. New fixtures save homeowners money by using less water. You can buy separate toilet bowls and tanks. Choose the ones that match the model and color of your current toilet. If you decide to replace your toilet, make sure you have a professional plumber install it. An improperly installed toilet could lead to additional damage. You may also have to get a new tank or a new toilet bowl.